Volvo CE Error Code Cleaner – Tier 4 Final / Stage V
 
The Ultimate Diagnostic Tool for Modern Volvo Construction Equipment Maximise uptime and eliminate the need for expensive dealer call-outs. This standalone error code cleaner is engineered for Volvo Construction Equipment manufactured from 2014 to the present day. Designed for the latest Tier 4 Final and Stage V engines, this device operates fully autonomously, requiring no laptop or external software to clear faults on-site.
 
Key Functions: Soot Reset and Torque Restoration Beyond clearing faults, this tool includes an EATS Reset (Soot Reset) function to recalibrate soot load values in the exhaust aftertreatment system. Crucially, it disables torque reduction caused by SCR or aftertreatment failures, allowing your machine to exit limp mode and return to full operation across Australia and New Zealand.
 
Simple Operation Procedure
Ignition ON: Turn the machine ignition to the ON position and wait several seconds.
Connect: Plug the cleaner directly into the machine's diagnostic connector.
Process: The green LED will blink during the clearing process. Wait until the LED becomes solid green.
Finish: Switch the ignition OFF and disconnect the device. All inactive error codes across supported systems are cleared automatically within seconds.
 
Supported Systems
EMS: Engine Management System.
ACM: Aftertreatment Control Module.
Full Coverage: Supports all other Electronic Control Units (ECUs) within the machine.
 
Compatibility: Volvo CE H & E Series This tool is designed for Volvo CE machines utilising Electrical System V4, including:
H-Series Wheel Loaders: L45H, L120H, L150H, and all models within the H-Series range.
E-Series Excavators: EC380E, EW140E, and all ECxxxE/EWxxxE models.
Current Models: Supports all Volvo CE machinery from 2014 until now.