Volvo CE Error Code Cleaner – D/G Series (Stage IIIB / Tier 4i, 8 PIN)
 
The "No-Laptop" Solution for Volvo Construction Equipment Stop losing hours waiting for a technician. This standalone error code cleaner is designed specifically for Volvo D and G Series machines (2004–2014) equipped with Stage IIIB / Tier 4i engines. If your machine is throwing nuisance codes or stuck in power reduction, this tool clears the fault and gets you back to work in seconds.
 
Key Advantage: Exit Torque Reduction This tool does not just clear codes; it disables torque reduction caused by aftertreatment system failures. It is the ultimate insurance policy against limp mode on remote sites across Australia and New Zealand.
 
Simple 60-Second Operation
Ignition ON: Switch the machine ignition to the ON position.
Connect: Plug the cleaner into the Volvo 8 PIN diagnostic connector.
Wait: The green LED will blink. Wait until the light turns solid green.
Finish: Switch the ignition OFF and disconnect the tool. All inactive error codes across all systems are now cleared automatically.
 
Supported Systems & Functions
MID 128: Engine ECU
MID 233: Aftertreatment Control Module
Full Coverage: Supports all other onboard systems.
Torque Management: Restores full power by clearing aftertreatment-related derates.
 
Compatibility: 
Volvo CE D & G Series This tool is compatible with all Volvo CE machines utilising Electrical System V2 and the 8 PIN connector, including:
G-Series Wheel Loaders: L45G, L120G, L150G, and all others in the series.
D-Series Excavators: EC380D, EW140D, and all ECxxxD/EWxxxD models.
Manufacturing Years: 2004 – 2014.