EMRT Professional NOx Sensor Emulator – MAN (ANZ Wired Edition)
Hard-Wired Solution for TGX, TGS, TGA, and MAN Buses
 
The EMRT Professional MAN Wired Emulator is a ruggedised, high-fidelity solution designed for the demanding operational environments of Australia and New Zealand. This unit is specifically engineered for installations where the original sensor connector is damaged or where a permanent, hard-wired integration into the vehicle's electrical harness is preferred for maximum reliability.
 
Key Features
ANZ Localised Compatibility – Specifically programmed for MAN engines using the EDC7C32 engine controller, common in Australian-delivered heavy and medium-duty models.
Versatile Wired Integration – Connects directly into the vehicle's harness, making it the preferred choice for aging fleet units where factory plugs have degraded or failed.
SCR System Integrity – Works seamlessly alongside a functioning SCR system. It does not require the system to be disabled, allowing for continued operation even if catalyst or AdBlue injector efficiency has declined.
Torque Derate Restoration – Immediately clears NOx-related "Check Engine" lights and restores full engine power across the TG-series range.
Ruggedised for the ANZ Region – Once installed and sealed, the module is fully waterproof and built to survive the extreme vibration, dust, and temperature fluctuations typical of Australian line-haul and vocational work.
 
Emulated Components
NOx Sensor (Provides stable, high-fidelity nitrogen oxide level readings to the Engine Control Module).
 
Compatibility (ANZ Models)
MAN Euro 4 and Euro 5 Platforms (EDC7C32):
MAN TGX (Heavy-duty line-haul)
MAN TGS (Construction, vocational, and regional distribution)
MAN TGA (Legacy heavy-duty range)
MAN TGM & TGL (Medium and light-duty range)
MAN Buses & Coaches (All models equipped with MAN engines and EDC7C32 controllers)
 
Installation Overview
Ideal for custom installations or repairing damaged factory wiring:
Locate the NOx sensor wiring on the chassis or engine harness.
Connect the emulator wires (Power, Ground, and CAN-bus lines) as per the provided wiring diagram.
Seal all connections using high-quality heat-shrink or waterproof connectors.
Secure the module to a protected area of the chassis rail. Result: Immediate NOx signal restoration and permanent torque derate cancellation.