EMRT Professional NOx Sensor Emulator – Iveco (ANZ Wired Edition)
Hard-Wired Solution for Stralis, Eurocargo, and ACCO Euro 4/5
 
The EMRT Professional Iveco Wired Emulator is a ruggedised, high-fidelity solution designed for the unique demands of the Australian and New Zealand transport industries. This unit is specifically engineered for installations where the original sensor connector is damaged, brittle, or where a permanent, hard-wired integration into the vehicle's electrical harness is preferred for maximum reliability.
 
Key Features
ANZ Localised Compatibility – Programmed for the FPT (Fiat Powertrain) engines found in locally delivered Iveco and Brisbane-built ACCO models.
Versatile Wired Integration – Connects directly to the original harness, making it the preferred choice for older fleet units where factory plugs have degraded or failed.
SCR System Integrity – Works seamlessly alongside a functioning SCR system. It does not require the system to be disabled, allowing for continued operation even if catalyst or AdBlue injector efficiency has declined.
Torque Derate Restoration – Immediately clears NOx-related "Check Engine" lights and restores full engine torque to Cursor and Tector engines.
Ruggedised for the Outback – Once installed and sealed, the module is fully waterproof and built to survive the extreme vibration, dust, and temperature fluctuations of the ANZ region.
 
Emulated Components
NOx Sensor (Provides stable, high-fidelity nitrogen oxide level readings to the ECM).
 
Compatibility (ANZ Models)
Iveco & ACCO Euro 4 and Euro 5 Platforms:
IVECO Stralis / Stralis AS-L (B-Double and Single configurations).
IVECO ACCO (The Australian standard for waste and vocational applications).
IVECO Eurocargo (Medium-duty Tector engine range).
IVECO Trakker (Heavy-duty construction and mining).
Powerstar (Cursor-engine "bonneted" variants).
Irisbus Coaches & Buses (Magelys, Crossway, Arway, and more).
 
Installation Overview
Ideal for custom installations or repairing damaged wiring:
Locate the NOx sensor wiring on the chassis or engine harness.
Connect the emulator wires (Power, Ground, and CAN-bus lines) as per the provided schematic.
Seal all connections with high-quality heat-shrink or waterproof connectors.
Secure the module to a protected area of the chassis rail. Result: Immediate NOx signal restoration and permanent torque derate cancellation.