EMRT Professional SCR & NOx Emulator – Scania Euro 4/5 (2007–2013)
"Quick Connect" Plug & Play Solution for R, P, G, and K Series
 
The EMRT Professional Scania Euro 4/5 QC Emulator is a high-performance recovery tool for vehicles utilising the Scania EEC architecture. Featuring a factory-spec "Quick Connect" interface that plugs directly into the original SCR harness at the AdBlue tank, this module allows for a 60-second bypass—instantly restoring 100% engine torque and bypassing the complex faults caused by failing pumps, sensors, or ECUs.
 
Key Features
Instant Tank-Side Integration: A true Plug & Play hardware interface. Simply disconnect the factory harness from the AdBlue tank and click in the EMRT module. No cutting, soldering, or wire splicing is required.
Full EEC System Emulation: This single module emulates the entire EEC (Exhaust Emission Control) network, including the air-assisted pump assembly, downstream NOx sensor, and tank sensors.
Automatic Torque Recovery: Features smart-sync technology that automatically communicates "System Normal" to the Engine Management System upon connection. It instantly clears performance-limiting limp modes and 40% torque derates.
Non-Invasive & Reversible: Ideal for fleet operators who require a solution that can be removed or swapped back to factory settings in seconds without leaving a trace.
Ruggedised for ANZ Conditions: Fully resin-sealed and waterproofed to withstand the high-vibration and harsh road-grime typical of Australian and New Zealand routes.
 
Emulated Components
This module provides high-fidelity digital reporting for:
Scania AdBlue Pump Assembly (including internal pressure sensors).
Downstream NOx Sensor (Digital CAN signals).
AdBlue Tank Sensors (Level and Temperature).
Exhaust Emission Control ECU (EEC).
 
Compatible Models & Series
Designed for Scania Euro 4 and Euro 5 platforms (2007–2013):
Scania Truck Series: R-Series, P-Series, G-Series, and T-Series.
Scania Bus & Coach: K-Series and N-Series chassis.
Emission Standards: Euro 4, Euro 5, and EEV (Enhanced Environmentally Friendly Vehicle).
 
Installation Overview
Mounts in approximately 60 seconds:
Locate the main SCR plug on the side of the AdBlue tank.
Disconnect the factory harness and Plug in the EMRT Professional QC Emulator.
Done. The truck will now receive a "System Normal" signal across the entire SCR network.