EMRT SCR/DPF Emulator for Volvo CE HM (QC Connector)

The EMRT Plug & Play solution is a comprehensive system designed to fully emulate the SCR/DPF HM series aftertreatment on a vast range of Volvo Construction Equipment powered by D4J, D6J, and D8J engines.

Key Features

Total HM Series Emulation: Provides complete electronic simulation of the entire SCR and DPF HM series system.
EMRT Plug & Play Technology: Equipped with a heavy-duty QC (Quick Connect) connector for an immediate, hassle-free installation without cutting wires.
Ruggedised Design: Housed in a 100% waterproof industrial casing, purpose-built for the harshest Australian worksites.
Instant Sync: Features automatic activation and synchronisation with the machine's ECU the moment it's connected.
Universal Compatibility: A versatile solution across Volvo CE excavators, wheel loaders, compactors, and motor graders.
Harness Protection: Includes an ACM module blanking plug to keep the original factory connector clean and protected from the elements.

Emulated Components

AdBlue Pump Assembly (including Pressure Sensor)
NOx Sensors (Upstream and Downstream)
Combined Catalyst and DPF Temperature Sensors
DPF Differential Pressure Sensor
AdBlue Tank Temperature and Level Sensors
Aftertreatment Control Module (ACM) ECU signals

Simple Installation Guide

Replace ACM: Disconnect the factory harness from the ACM (Aftertreatment Control Module) and plug it directly into the EMRT Plug & Play emulator.
Weatherproof the Connection: Fit the provided protective cap (blanking plug) onto the original, now-unused ACM connector to prevent corrosion.
Restore Exhaust Flow: Physically clear, hollow out, or bypass the DPF filter to ensure unrestricted exhaust flow and prevent engine back-pressure.

Compatible Engine Models

Volvo D4J
Volvo D6J
Volvo D8J

Excavators:

EC140E, EC160E, EC180E, EC220E, EC230F, EC250E, EC300E
ECR145E, ECR235E
EW160E, EW180E, EWR170E

Wheel Loaders:

L45H, L50H, L60H, L70H, L90H, L110H, L120H

Motor Graders:

G930C, G940C, G946C, G960C

Compactors:

SD115B, SD135B

Why Choose the EMRT Solution?

When your Volvo machine goes into "Limp Mode", it doesn't just slow down your work—it stops your revenue.

Avoid Costly Downtime: The EMRT Plug & Play emulator bypasses common failures in the AdBlue pump and NOx sensors, keeping your machine at full power.
Save on Maintenance: Eliminate the need for expensive DPF regenerations and the constant replacement of high-priced aftertreatment sensors.
No Specialist Tools: Our "Auto-Clear" logic ensures that faults become inactive automatically once the engine is at operating temperature—no dealer-only diagnostic software required.

Agriculture